|
The following article was sourced from a Wikipedia page at the following address: http://en.wikipedia.org/wiki/Corset CORSETS
A corset is a garment worn to hold and train the torso into a desired shape for aesthetic or medical purposes (either for the duration of wearing it or with a more lasting effect). Both men and women are known to wear corsets, though women more commonly do. In recent years, the fashion industry has also borrowed the term "corset" to refer to tops which, to varying degrees, mimic the look of traditional corsets without actually acting as them. While these modern corsets and corset tops often feature lacing or boning and generally imitate a historical style of corsets, they have very little, if any, effect on the shape of the wearer's body. Genuine corsets are usually made by a corsetmaker and are frequently fitted to the individual wearer. ETYMOLOGY
The word corset is derived from the Old French word corps and the diminutive of body, which itself derives from corpus—Latin for body. The craft of corset construction is known as corsetry, as is the general wearing of them. (The word corsetry is sometimes also used as a collective plural form of corset.) Someone who makes corsets is a corsetier or corsetière (French terms for a man and for a woman, respectively), or sometimes simply a corsetmaker. In 1828, the word corset came into general use in the English language. The word was used in The Ladies Magazine to describe a "quilted waistcoat" that the French called un corset. It was used to differentiate the lighter corset from the heavier stays of the period.
USES
Fashion For men, corsets are more customarily used to slim the figure. However, there was a period from around 1820 to 1835 when a wasp-waisted figure (a small, nipped-in look to the waist) was also desirable for men; wearing a corset sometimes achieved this. An "overbust corset" encloses the torso, extending from just under the arms toward the hips. An "underbust corset" begins just under the breasts and extends down toward the hips. A "longline corset" – either overbust or underbust – extends past the iliac crest, or the hip bone. A longline corset is ideal for those who want increased stability, have longer torsos, or want to smooth out their hips. A "standard" length corset will stop short of the iliac crest and is ideal for those who want increased flexibility or have a shorter torso. Some corsets, in very rare instances, reach the knees. A shorter kind of corset that covers the waist area (from low on the ribs to just above the hips), is called a waist cincher. A corset may also include garters to hold up stockings; alternatively, a separate garter belt may be worn for that. Traditionally, a corset supports the visible dress and spreads the pressure from large dresses, such as the crinoline and bustle. At times, a corset cover is used to protect outer clothes from the corset and to smooth the lines of the corset. The original corset cover was worn under the corset to provide a layer between it and the body. Corsets were not worn next to the skin, possibly due to difficulties with laundering these items during the 19th century, as they had steel boning and metal eyelets that would rust. The corset cover was in the form of a light chemise, made from cotton lawn or silk. Modern corset wearers also wear corset liners for many of the same reasons, but tight-lacers also use them to prevent rope burn from the corset's laces.
Medical
Fetish CONSTRUCTION Corsets are typically constructed of a flexible material (like cloth, particularly coutil, or leather) stiffened with boning (also called ribs or stays) inserted into channels in the cloth or leather. In the 19th century, bones of whale were favoured for the boning. Plastic is now the most commonly used material for lightweight, faux corsets and the majority of poor quality corsets. Spring and/or spiral steel is preferred for stronger and generally better quality corsets. Other materials used for boning have included ivory, wood, and cane. (By contrast, a girdle is usually made of elasticized fabric, without boning.) Corsets are held together by lacing, usually (though not always) at the back. Tightening or loosening the lacing produces corresponding changes in the firmness of the corset. Depending on the desired effect and time period, corsets can be laced from the top down, from the bottom up, or both up from the bottom and down from the top, using two laces that meet in the middle. In the Victorian heyday of corsets, a well-to-do woman's corset laces would be tightened by her maid, and a gentleman's by his valet. However, Victorian corsets also had a buttoned or hooked front opening called a busk. If the corset was worn loosely, it was possible to leave the lacing as adjusted and take the corset on and off using the front opening. (If the corset is worn snugly, this method will damage the busk if the lacing is not significantly loosened beforehand). Self-lacing is also incredibly difficult with tightlacing - also called waist training - which strives for the utmost possible reduction of the waist. Corset and bodice lacing became a mark of class; women who could not afford servants often wore front laced bodices. COMFORT In the past, a woman's corset was usually worn over a chemise, a sleeveless low-necked gown made of washable material (usually cotton or linen). It absorbed perspiration and kept the corset and the gown clean. In modern times, an undershirt or corset liner may be worn. Moderate lacing is not incompatible with vigorous activity. Indeed, during the second half of the 19th century, when corset wearing was common, there were sport corsets specifically designed to wear while bicycling, playing tennis, or horseback riding, as well as for maternity wear. WAIST REDUCTION By wearing a tightly-laced corset for extended periods, known as tightlacing, men and women can learn to tolerate extreme waist constriction and eventually reduce their natural waist size. Though petite women are often able to get down to a smaller waist in absolute numbers, women with more fat are typically able to reduce their waists by a larger percentage. Many tightlacers dream of waists that are 16 inches (41 cm) and 17 inches (43 cm). Some went so far that they could only breathe with the top part of their lungs. This caused the bottom part of their lungs to fill with mucus. Symptoms of this include a slight but persistent cough, as well as heavy breathing, causing a heaving appearance of the bosom. Until 1998, the Guinness Book of World Records listed Ethel Granger as having the smallest waist on record at 13 inches (33 cm). After 1998, the category changed to "smallest waist on a living person" and Cathie Jung took the title with a waist measuring 15 inches (38 cm). Other women, such as Polaire, also have achieved such reductions (14 inches (36 cm) in her case). However, these are extreme cases. Corsets were and are still usually designed for support, with freedom of body movement an important consideration in their design.
HISTORY The corset has been erroneously attributed to Catherine de' Medici, wife of King Henry II of France. She enforced a ban on thick waists at court attendance during the 1550s. For nearly 350 years, women's primary means of support was the corset, with laces and stays made of whalebone or metal. Other researchers have found evidence of the use of corsets in early Crete. The corset has undergone many changes. Originally, it was known as "a pair of bodys" in the late 16th century. It was a simple bodice, stiffened with boning of reed or whalebone. A busk made of wood, horn, whalebone, metal or ivory further reinforced the central front. It was most often laced in the back, and was, at first, a garment reserved for the aristocracy. The term "stays" was generally used during the 17th and 18th centuries. In the 17th century, tabs (called "fingers") at the waist were added. Stays evolved in the 18th century when whalebone was used more, and there was more boning used in the garment. The shape of the stays changed as well. While the stays were low and wide in the front, they could reach as high as the upper shoulder in the back. Stays could be strapless or use shoulder straps. The straps of the stays were generally attached in the back and tied at the front sides. The purpose of 18th century stays was to support the bust and confer the fashionable conical shape while drawing the shoulders back. At this time, the eyelets were reinforced with stitches and were not placed across from one another, but instead staggered. This allowed the stays to be spiral laced. One end of the stay lace was inserted and knotted in the bottom eyelet; the other end was wound through the stays' eyelets and tightened on the top. Tight-lacing was not the purpose of stays during this time period. Women in all societal levels, from ladies of the court to street vendors, wore stays. During this time period, there is evidence of a variant of stays, called "jumps", which were looser than stays with attached sleeves, like a jacket.
Corsets were originally quilted waistcoats, which French women wore as an alternative to stiff corsets. They were only quilted linen, laced in the front, and un-boned. This garment was meant to be worn on informal occasions, while stays were worn for court dress. In the 1790s, stays began to fall out of fashion. This development coincided with the French Revolution and the adoption of neoclassical styles of dress. Interestingly, it was the men, Dandies, who began to wear corsets. The fashion persisted thorough the 1840s, though after 1850 men who wore corsets claimed they needed them for "back pain". In the early 19th century, when gussets were added for room for the bust, stays became known as corsets. They also lengthened to the hip and the lower tabs were replaced by gussets at the hip and had less boning. The shoulder straps disappeared in the 1840s for normal wear. In the 1820s, fashion changed again, with the waistline lowered back to almost the natural position. Corsets began to be made with some padding and more boning. Some women made their own, while others bought their corsets. Corsets were one of the first mass-produced garments for women. Corsets began to be more heavily boned in the 1840s. By 1850, steel boning became popular. With the advent of metal eyelets, tight lacing became possible. The position of the eyelets changed. They were situated across from one another at the back. The front was fastened with a metal busk in front. Corsets were mostly white. The corsets of the 1850s–1860s were shorter than the corsets of the 19th century through 1840s. This was because of a change in the silhouette of women's fashion. The 1850s and 1860s emphasized the hoopskirt. After the 1860s, when the hoop fell out of style, the corset became longer to mould the abdomen, exposed by the new lines of the princess or cuirass style. During the Edwardian period, the straight front corset (also known as the S-Curve corset) was introduced. This corset was straight in front with a pronounced curve at the back that forced the upper body forward and the derrière out. This style was worn from 1900 to 1908. The corset reached its longest length in the early 20th century. At first, the longline corset reached from the bust down to the upper thigh. There was also a style of longline corset that started under the bust, and necessitated the wearing of a brassiere. This style was meant to complement the new silhouette. It was a boneless style, much closer to a modern girdle than the traditional corset. The longline style was abandoned during World War I. The corset fell from fashion in the 1920s in Europe and North America, replaced by girdles and elastic brassieres, but survived as an article of costume. Originally an item of lingerie, the corset has become a popular item of outerwear in the fetish, BDSM and goth subcultures. In the fetish and BDSM literature, there is often much emphasis on tightlacing, and many corset makers cater to the fetish market. Outside the fetish community, living history re-enactors and historic costume enthusiasts still wear stays and corsets according to their original purpose to give the proper shape to the figure when wearing historic fashions. In this case, the corset is underwear rather than outerwear. Skilled corset makers are available to make reproductions of historic corset shapes or to design new styles. In the late 1940s and early 1950s, there was a brief revival of the corset in the form of the waist cincher sometimes called a "waspie". This was used to give the hourglass figure as dictated by Christian Dior's "New Look". However, use of the waist cincher was restricted to haute couture, and most women continued to use girdles. This revival was brief, as the New Look gave way to a less dramatically-shaped silhouette. Since the late 1980s, the corset has experienced periodic revivals, all which have usually originated in haute couture and have occasionally trickled through to mainstream fashion. These revivals focus on the corset as an item of outerwear rather than underwear. The strongest of these revivals was seen in the Autumn 2001 fashion collections and coincided with the release of the film Moulin Rouge!; the costumes featured many corsets as characteristic of the era. Another fashion movement, which has renewed interest in the corset, is the Steampunk culture that utilizes late-Victorian fashion shapes in new ways. SPECIAL TYPES There are some special types of corsets and corset-like devices which incorporate boning.
Corset dress Other types of corset dresses are created for unique high fashion looks by a few modern corset makers. These modern styles are functional as well as fashionable and are designed to be worn with comfort for a dramatic look.
Neck corset To read more about corsets, please click on the following link: http://en.wikipedia.org/wiki/Corset |
|
| Wikipedia: |
 http://en.wikipedia.org/wiki/Corset
|
